Tire Inflator SK/AO
November 2, 2018
Filter
November 2, 2018
Show all

Tire Inflator SKE-012-OD

Main features:

*174PSI/12bar/1200kPa Output pressure

*Fit for almost any size automotive service facility

*Auto-Start Inflation

*Fully Automated, fully programmable, micro-processor controlled conversion system

*Self-diagnostic features

*Suit for: Car, Light Truck, Bus

Category:

Technical Parameters:

Dimensions   (Height*Width*Depth) 1260mm*360mm*360mm
Net   Weight 17.5kg/38.6lbs
Gross   Weight 21kg/44.6lbs
Packing   Size (Height*width*Depth) 200mm*1290mm*360mm
Power   Requirement 100-240Vac   50/60HZ
Power   Consumption 23VA
Operating   Temperature Range -20℃/-4℉   to 70℃ /158℉
Max   Inlet Air/ Nitrogen Supply 217PSI/   15bar /1500kPa
Operating   Range 5-174PSI/0.3-12bar/35-1200kPa
Accuracy ±1PSI/0.07bar   / 7kPa
Resolution 1PSI/   0.1bar /5kPa
Units   of Measurement PSI/   bar / kPa

Specifications:

1.Auto-Start inflation

2.Automatic zero drift adjustment

3.Remain at last setting

4.Comprehensive diagnostics and error reporting

5.Audible and visual end of the cycle signal indicators

6.Large backlight LCD display

7.Vandal resistant mechanical switches

8.Suits Standard nitrogen bottle/ Direct nitrogen supply from generator/Air compressor

9.1 Nos.*10M/32.8ft standard hose with single clip-on open type chuck

 

Operation Steps:

1. Set final target pressure using the +and -buttons.The LCD screen will show the target pressure.

2. Connect air hose to tire valve stem

3. Push the “FILL” button once

4. When unit “beeps” and the LCD screen flashes the target pressure, tire inflation is complete

5. Immediately remove hose

ArabicChinese (Simplified)EnglishFrenchRussianSpanish