SK-TI

Tyre Inflator
( Air /Nitrogen inflation; Auto-Start Inflation; Self-diagnostic and error reporting )

* 174PSI /12bar /1200kPa Output pressure

* Provide air /Nitrogen inflation

* Fit for almost any size automotive service facility

Main features:

* 174PSI /12bar /1200kPa Output pressure

* Provide air /Nitrogen inflation

* Fit for almost any size automotive service facility

* Auto-Start Inflation

* Automatic zero drift adjustment

* Self-diagnostic and error reporting

* Cast base and extruded aluminium body with high quality powder coat finish

* “Beeps” after finish inflation operation

* Fit for car, light truck, bus

Technical Parameters:

Dimensions   (Height*Width*Depth) 1260mm*360mm*360mm
Net   Weight 17.5kg/38.6lbs
Gross   Weight 21kg/44.6lbs
Packing   Size (Height*width*Depth) 200mm*1290mm*360mm
Power   Requirement 100-240Vac   50/60HZ
Power   Consumption 23VA
Operating   Temperature Range -20℃/-4℉   to 70℃ /158℉
Max   Inlet Air/ Nitrogen Supply 217PSI/   15bar /1500kPa
Operating   Range 5-174PSI/0.3-12bar/35-1200kPa
Accuracy ±1PSI/0.07bar   / 7kPa
Resolution 1PSI/   0.1bar /5kPa
Units   of Measurement PSI/   bar / kPa

Specifications:

1.Auto-Start inflation

2.Automatic zero drift adjustment

3.Remain at last setting

4.Comprehensive diagnostics and error reporting

5.Audible and visual end of the cycle signal indicators

6.Large backlight LCD display

7.Vandal resistant mechanical switches

8.Suits Standard nitrogen bottle/ Direct nitrogen supply from generator/Air compressor

9.1 Nos.*10M/32.8ft standard hose with single clip-on open type chuck

 

Operation Steps:

1. Set final target pressure using the +and -buttons.The LCD screen will show the target pressure.

2. Connect air hose to tire valve stem

3. Push the “FILL” button once

4. When unit “beeps” and the LCD screen flashes the target pressure, tire inflation is complete

5. Immediately remove hose

ENQUIRY

Related Products

0086-10-52310730
PRODUCTS   LIST